Search

Smart Electronics 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Products > Module > Smart Electronics 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module
    • 1
    • 2
    • 3

Smart Electronics 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Use precautions:

1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and
​negative do not pick wrong
2. Recommended power supply ±65V
3. Recommended 4-8Ω / 10-18inch speaker
4. Carefully check before electricity, ensure the wiring is correct.
shared：


1. Power supply: dual DC power supply ± 58 --- ± 70V
2. The rated output power: 500W (± 65V power supply, 4 ohm load, distortion 10%)
3. Efficiency:> = 90%
4. SNR: 90dB
5. The total harmonic distortion:
380W (± 65 power 4 ohm speaker, distortion <0.1%)
280W (± 65 power 8 ohm speaker, distortion <0.1%)
6. Frequency range: 20Hz-20KHz
7. Speaker: 4-8Ω
8. Voltage Magnification: 36 times
9. Input sensitivity 1.5V (RMS)
10. Output short circuit protection: Yes
11. That output DC bias protection speaker protection: Yes
12. Over-temperature protection: Yes, radiator FET temperature higher than 100 ° C,
turn off the output!
13. Amplifier board size: length x width x height = 98x43x30mm
 
Use precautions:
 
1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and
negative do not pick wrong
2. Recommended power supply ±65V
3. Recommended 4-8Ω / 10-18inch speaker

4. Carefully check before electricity, ensure the wiring is correct.




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics Raindrop sensor module/rain sensor/large area raindrop module

Raindrop sensor module/rain sensor/large area raindrop module * Distribution bit to adjust sensitivity * A fixed bolt hole for easy installation * Power indicator, the output signal LED indicator * The comparator output, the signal is clean, waveform, driving ability over 15mA * Wide voltage LM393 comparator * A large area of rain board, more conducive to detect rain * Board with positioning holes to facilitate installation * Raindrops and control panels are separate, easy to wire leads

Smart Electronics LCD1602 yellow-green screen 1602A lcd display blue

LCD1602 yellow-green screen 1602A lcd display blue 69.5*21.8*17.8 weighs about 30 grams

Smart Electronics TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

Smart Electronics DC5V-12V Charging module for lithium battery 18650 UPS voltage converter uninterruptible power supply module

DC5V-12V Charging module for lithium battery 18650 UPS voltage converter uninterruptible power supply module Product parameters: Starting voltage: 1.2V Working voltage: 2V-6.5V Output voltage: 5V/9V/12V optional Working voltage is 2V-6.5V Input current: 2A Output power: ≤8W (no matter how high it is, it is easy to overheat) No-load current 2-3.5mA (input 1.5V output 12V) Board size: 33*16*6.5mm Output pad: USB/DC optional

Smart Electronics Mini Ble Audio Receiver Amplifier Board Module With Stereo Speakers

Mini Ble Audio Receiver Amplifier Board Module With Stereo Speakers

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module

Smart Electronics High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32

High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32

Smart Electronics 3pin PCB DIY Starter Kit KY-015 DHT11 Digital Temperature Relative Humidity Sensor Module DHT11

3pin PCB DIY Starter Kit KY-015 DHT11 Digital Temperature Relative Humidity Sensor Module DHT11

Smart Electronics 0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

Smart Electronics ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

Smart Electronics Data transmission/transceiver/SI4432 industrial grade Wireless RF receiver cc1101 module

Data transmission transceiver SI4432 industrial grade Wireless RF receiver cc1101 module

Smart Electronics ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

Smart Electronics IRS2092S 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

IRS2092S 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Smart Electronics HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w

HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w Features: 4 USB expansion ports, compatible with USB2.0 / 1.1 transmission USB to UART for Raspberry Pi for serial debugging Multiple indicators for easy access to power, USB to UART and USB expansion interface Operating voltage: 5V Product Size: 65mm × 30mm Fixed hole diameter: 3.0mm Not include Raspberry Pi

High Power Board Automatic Switching Battery Power XH-M350 Battery Emergency Switch Module 12v150w

Smart Electronics CH341 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver

CH341 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver

Smart Electronics HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module

HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module Product model: HC-08 Working frequency band: 2.4G Communication interface: UART3.3VTL level Working voltage: 3.0-3.6V RSSI support: not supported Communication level: 3.3V Transmission power: 4dBm Reference distance: 80 meters Air speed: 2Mbps Antenna interface: built-in PCB antenna Communication current: 0.4uA Receiving sensitivity: 85dbm@2Mbps Working humidity: 10%~90% Storage temperature: 40 ℃ -+80 ℃ Working temperature: -25 ℃ -75 ℃

Smart Electronics 4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS

4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS 1. Module name: 4 series lithium battery protection board 2. Modular nature: polymer lithium battery protection board 3. Overcharge detection voltage: 4.25 ± 0.025V 4. Overcharge release voltage: 4.15 ± 0.05V 5. Overdischarge detection voltage: 2.50 ± 0.08V 6. Over-discharge termination voltage: 3 ± 0.1V 7. Overcurrent: 20-30A

Smart Electronics PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply) Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)
Previous： Smart Electronics Thermoelectric Peltier Refrigeration Cooling System Kit Cooler for DIY TEC-12706 mini air conditioner
Next： Smart Electronics XH-M542 Mono Digital Power Amplifier Board TPA3116D2 High Power Amplifier 100W
Return
TOP
86-755-83877216
smartbes
smartbes