Search

Smart Electronics TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

Products > Module > Smart Electronics TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

Smart Electronics TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection
shared：

Model Number
18650 tp4056
Product Name
Lithium Battery Charger Module
Maximum charging current
1000mA
Input voltage
5V
Charging cut-off voltage
4.2V ± 1%
Three interfaces
MICRO/MINI/TYPE-C
Over discharge protection voltage
2.5V
Overcurrent protection current
3A

Type 1
1A lithium battery protection MICRO interface
Type 2
TP4056 without protective MINI interface
Type 3
TP4056 without protected MICRO interface
Type 4
TP4056 with protected TYPE-C interface
Type 5
TP4056 lithium battery without protection TYPE-C

Usage:

Attention: When the battery is first connected, there may be no voltage output between OUT+and OUT -.

At this time, charging with 5V voltage can activate the protection circuit. If the battery is short circuited from B+B -

and then connected again, charging is also necessary to activate the protection circuit. When using a mobile

phone charger for input, it should be noted that the charger must be able to output 1A or above,

otherwise it may not charge properly.


The TYPE C USB base and its adjacent+- pad are the power input terminals, connected to a 5V voltage.

B+is connected to the positive pole of the lithium battery, and B - is connected to the negative pole of the

lithium battery. OUT+and OUT - connect to the load, such as the positive and negative poles of the mobile

booster board or other loads.


Connect the battery to B+B -, insert the phone charger into the USB base, the red light indicates charging,

and the blue light indicates full charge.


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

Smart Electronics ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

Smart Electronics 16 channel relay module 5v power supply control board module 5V12V with optocoupler protection LM2596

16 channel relay module 5v power supply control board module 5V12V with optocoupler protection LM2596

Smart Electronics 4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module

4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module 5 V-12V to TTL control signal The control signal DC or AC, 220V AC load can be controlled. There is a normally open and one normally closed contact A power indicator light A control indicator, pull off, disconnect does not shine Transistor drive to increase the relay coil control pins high impedance. The control pin has a pull-down circuit to prevent malfunction relay vacant.

Smart Electronics ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

Smart Electronics MLX90640BAA/B 32 * 24 infrared temperature measurement dot matrix sensor module Infrared imaging/IR thermal imager camera module

MLX90640BAA/B 32 * 24 infrared temperature measurement dot matrix sensor module Infrared imaging/IR thermal imager camera module SKU1-MLX90640ESF-BAB-000-TU probe SKU2-MLX90640ESF-BAA probe SKU3-MLX90640ESF-BAA module SKU4-MLX90640ESF-BAB module SKU5-GY-LCD90640-BAB with screen housing SKU6-GY-MODBUS-90640BAB Metal Tube MODBUS Protocol SKU7-GY-IR8062 80 * 60 resolution TTL output MLX90640BAA field of view 110 * 75 degrees (large angle, suitable for close measurement) MLX90640BAB field of view angle 55 * 35 degrees (small angle, suitable for long-distance measurement)

Smart Electronics XH-M131 5V 12V 24V Light Control Switch Photoresistor Relay Module Detection Sensor 10A brightness Automatic Control Module

XH-M131 5V 12V 24V Light Control Switch Photoresistor Relay Module Detection Sensor 10A brightness Automatic Control Module

Smart Electronics TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

Smart Electronics Esp-32s esp-wroom-32 Wifi Blue-tooth Board Esp32 Development Board esp 32 wroom

Esp-32s esp-wroom-32 Wifi Blue-tooth Board Esp32 Development Board esp 32 wroom Product Optional WROOM-32 WROOM-32U WROOM-32D Neutral WROOM-32 WROOM-32E

Smart Electronics Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

Smart Electronics ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module

ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleepcurrent and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.

Smart Electronics XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

Smart Electronics Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board

Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board This plate with switching function, SW short, will turn off the power amplifier Working Mode: Class D (PWM modulation type) Chip Type: PAM8610 Power Range: DC 6V-15V (self-protection) Recommended Voltage: DC 12V(2A) Output Power: 10Wx2(8Ω) 15Wx2(4Ω) Frequency Response: 20HZ-15KHZ Static Current: 20MA (DC12V) SNR: 90% Recommended Speakers: 10-100W Input Impedance: 15K Output Impedance: 4-8Ω Harmonic Distortion: <0.1% Size: Approx. 3cm x 2.5cm/ 1.19" x 0.98"

Smart Electronics PIR IR Light Motion Sensor Infrared Human Induction Lamp Switch 220V 50HZ Lights Control Ceiling On Off 3-6m Sensing

PIR IR Light Motion Sensor Infrared Human Induction Lamp Switch 220V 50HZ Lights Control Ceiling On Off 3-6m Sensing Product Parameter: 1.Sensing Mode:PIR sensing + light control 2.Rated Voltage:220V 50HZ 3.Output Way:Controllable Silicon 4.Load Power:filament lamp ≤100W electricity saving lamp ≤30W LED≤18W 5.Delay:20s (people are moving within the sensing range, the switch will auto delay ​and keep connecting;if people stay still,switch will stop responsing) 6.Sensing Distance:3-6m (high temperature will influence switch sensibility) 7.Sensing Angle:110° 8.Sensitivity to light :darkeness

Smart Electronics Relay Module For ARM PIC AVR DSP 10A 5V 2 Channel Relay Module Shield

Relay Module For ARM PIC AVR DSP 10A 5V 2 Channel Relay Module Shield Specifications : Size: 3.9cm x 5.1cm Materials: PCB board and electronic components Package included : 1 x 5V 2-Channel Relay Module Shield

Smart Electronics Pressure Temperature module The pressure sensor module replaces the BMP085 GY-68 BMP180

Pressure Temperature module The pressure sensor module repla

Smart Electronics JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module

JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module Model: JDY-34 Antenna type: PCB board mounted antenna Working frequency band: 2.4G Transmission power: 4dB (peak) Communication interface: UART Working voltage: 2.1V-3.6V Working temperature: -40 ° C-80 ° C Receiving sensitivity: -91dbm Transmission distance: 40 meters Module size: 27 * 12.88 * 1.8mm Bluetooth version: BLE4.2+SSP dual-mode (backward compatible with 4.2, 4.0, 3.0, 2.1, 2.0) Transmission rate: BLE14 K Bytes/s SPP 40K byte/s (Android or computer Bluetooth tested 40K byte/s speed) Command parameter saving: parameter configuration and power-off data are saved SIM welding temperature:<260 ℃ Working current: 15mA

Smart Electronics FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz

FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz
Previous： Smart Eletronics Universal Wireless Charging PCBA Coil Charging Pcb Circuit Board Qi Wireless charger receiver module
Next： Smart Electronics HC-05 master-slave integrated BlE module DIY wireless serial port transparent electronic module BLE
Return
TOP
86-755-83877216
smartbes
smartbes