Search

Smart Electronics 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For 14.8V 16.8V Lipo Cell Module

Products > Battery Protection Board > Smart Electronics 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For 14.8V 16.8V Lipo Cell Module
    • 1
    • 2
    • 3

Smart Electronics 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For 14.8V 16.8V Lipo Cell Module

4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For 14.8V 16.8V Lipo Cell Module

4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)

Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)

Product Size: 45 * 55 * 3.4mm (Standard Edition / Enhanced), 46 * 60 * 3.4mm (balanced version)

Product weight: 9.3g (standard / enhanced version), 10.3g (balanced version)

Charging voltage: 16.8V - 18.1V


shared：


4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
 
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
 
Product Size: 45 * 55 * 3.4mm (Standard Edition / Enhanced), 46 * 60 * 3.4mm (balanced version)
 
Product weight: 9.3g (standard / enhanced version), 10.3g (balanced version)
 
Charging voltage: 16.8V - 18.1V
 
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
 
Continuous charge current (upper limit): 20A
 
Equalization version: suitable for starting current below 80A, power 135W below the drill.


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics 3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB 320 * 480

3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB320 * 480

Smart Electronics FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz

FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz

Smart Electronics Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

Smart Electronics 12V Time Delay Relay Module Car Start Delay Switch Time Relay Module

12V Time Delay Relay Module Car Start Delay Switch Time Relay Module

DC-DC XL7015 module 5V-80V 0.8A Dc converter Step-down module Wide voltage input better than XL7005A

Smart Electronics 3.5 inch SPI serial port TFT LCD display module LCD touch screen ILI9488/6/1 driver 320X480

3.5 inch SPI serial port TFT LCD display module LCD touch screen ILI9488/6/1 driver 320X480

Smart Electronics 1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate

1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate 100% brand new and high quality! This section of induction heating using low-voltage DC power supply 12-48V. Maximum current 20A, maximum power 1000W. Can be used for DIY players to heat treatment of small parts such as quenching, annealing, etc. Can directly heat iron, carbon steel, graphite, titanium alloy and other materials. Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.

Smart Electronics ACS712ELC-05B 5A range ACS712 module AC current sensor module

ACS712ELC-05B 5A range ACS712 module AC current sensor module 1. Current sensor chip: ACS712ELC-05B; 2. Pin 5V power supply, onboard power indicator; 3. The module can measure plus or minus 5A current, corresponding to the analog output 185mV/A; 4. When no detection current passes, the output voltage is VCC/2; 5. PCB board size: 31(mm)x13(mm);

Smart Electronics ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

Smart Electronics 0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

Smart Electronics 0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface Feature Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed

Smart Electronics TPA3255 mono 600W high-power full frequency/subwoofer optional fever digital power amplifier board

TPA3255 mono 600W high-power full frequency/subwoofer optional fever digital power amplifier board TPA3255 is a high-performance class D power amplifier, it has class D efficiency and can bring true high-end sound quality. The device has an advanced integrated feedback design and a proprietary high-speed gate driver error correction function (PurePath™ Ultra HD). This technology allows the device to maintain ultra-low distortion throughout the audio frequency band while exhibiting wonderful sound quality.

Smart Electronics 3pin PCB DIY Starter Kit KY-015 DHT11 Digital Temperature Relative Humidity Sensor Module DHT11

3pin PCB DIY Starter Kit KY-015 DHT11 Digital Temperature Relative Humidity Sensor Module DHT11

Smart Electronics GY-530 VL53L0X Laser Ranging Sensor ToF Ranging Time of Flight Ranging Sensor Module

GY-530 VL53L0X Laser Ranging Sensor ToF Ranging Time of Flight Ranging Sensor Module

Smart Electronics JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module

JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module Model: JDY-34 Antenna type: PCB board mounted antenna Working frequency band: 2.4G Transmission power: 4dB (peak) Communication interface: UART Working voltage: 2.1V-3.6V Working temperature: -40 ° C-80 ° C Receiving sensitivity: -91dbm Transmission distance: 40 meters Module size: 27 * 12.88 * 1.8mm Bluetooth version: BLE4.2+SSP dual-mode (backward compatible with 4.2, 4.0, 3.0, 2.1, 2.0) Transmission rate: BLE14 K Bytes/s SPP 40K byte/s (Android or computer Bluetooth tested 40K byte/s speed) Command parameter saving: parameter configuration and power-off data are saved SIM welding temperature:<260 ℃ Working current: 15mA

RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V

VCC: + 3.3V TXD : The module's TTL (UART) to send, connected to the microcontroller's RXD receiver pin; RXD : The module's TTL (UART) receiver, connected to the microcontroller TXD send pin; GND : The module ground wire (this wire must be connected with the ground wire of microcontroller system);

Smart Electronics XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

Green mini version RC522 RFID Module IC Card Proximity Module MFRC-522 RF Module with S50 Fudan Card Keychain

Smart Electronics JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module

JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module Model: JDY-23 Working frequency band: 2.4G Transmission power: 4dB (maximum) Communication interface: UART Working voltage: 1.8-3.6V Working temperature: -40 ℃ -80 ℃ Antenna: Built in PCB antenna Receiving sensitivity: -97dbm Transmission distance: 60 meters Master Slave Support: Slave Module size: 19.6 * 14.94 * 18mm (length, width, height) Bluetooth version: BLE5.0 (also includes BLE4.0 and BLE4.2) Wake up current: 800uA (with broadcast) Shallow sleep current:<50uA (with broadcast) Command parameters: Save parameter configuration, power-off data saved SMT welding temperature:<260 ℃ RF TX/RX peak current: 5mA
Previous： Smart Electronics Raspberry pi 0 Zero Raspberry Pi Zero Pi W version Original Development Board
Next： Smart Electronics BLE 4.0 serial port patch type cc2540 cc2541 data transparent transmission iBeacon module
Return
TOP
86-755-83877216
smartbes
smartbes