Search

Smart Electronics JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module

Products > Module > Smart Electronics JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module
    • 1
    • 2
    • 3
    • 4
    • 5

Smart Electronics JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module

JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module

Model: JDY-23
Working frequency band: 2.4G
Transmission power: 4dB (maximum)
Communication interface: UART
Working voltage: 1.8-3.6V
Working temperature: -40 ℃ -80 ℃
Antenna: Built in PCB antenna
Receiving sensitivity: -97dbm
Transmission distance: 60 meters
Master Slave Support: Slave
Module size: 19.6 * 14.94 * 18mm (length, width, height)
Bluetooth version: BLE5.0 (also includes BLE4.0 and BLE4.2)
Wake up current: 800uA (with broadcast)
Shallow sleep current:<50uA (with broadcast)
Command parameters: Save parameter configuration, power-off data saved
SMT welding temperature:<260 ℃
RF TX/RX peak current: 5mA
shared：

JDY-23 BLE5.0 Ble transparent data transmission CC2541 slave Ble module

Feature
Model: JDY-23 Working frequency band: 2.4G Transmission power: 4dB (maximum) Communication interface: UART Working voltage: 1.8-3.6V Working temperature: -40 ℃ -80 ℃ Antenna: Built in PCB antenna Receiving sensitivity: -97dbm Transmission distance: 60 meters Master Slave Support: Slave Module size: 19.6 * 14.94 * 18mm (length, width, height) Bluetooth version: BLE5.0 (also includes BLE4.0 and BLE4.2) Wake up current: 800uA (with broadcast) Shallow sleep current:<50uA (with broadcast)
Command parameters: Save parameter configuration, power-off data saved SMT welding temperature:<260 ℃ RF TX/RX peak current: 5mA

Send Message to us

*Part Number | Package Type | Quantity are needed if you send messages to us *Send all models you are looking for to us,we can quote all of them. *Welcome to attach Purchase / Factory Bom


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

43A current limiting control semiconductor refrigeration driven high-power intelligent vehicle motor drive module BTS7960

Smart Electronics ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module

ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleepcurrent and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.

Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board

This plate with switching function, SW short, will turn off the power amplifier Working Mode: Class D (PWM modulation type) Chip Type: PAM8610 Power Range: DC 6V-15V (self-protection) Recommended Voltage: DC 12V(2A) Output Power: 10Wx2(8Ω) 15Wx2(4Ω) Frequency Response: 20HZ-15KHZ Static Current: 20MA (DC12V) SNR: 90% Recommended Speakers: 10-100W Input Impedance: 15K Output Impedance: 4-8Ω Harmonic Distortion: <0.1% Size: Approx. 3cm x 2.5cm/ 1.19" x 0.98"

Smart Electronics ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

DC-DC XL7015 module 5V-80V 0.8A Dc converter Step-down module Wide voltage input better than XL7005A

The promotional HC-SR04 ultrasonic module Ultrasonic ranging module

The main technical parameters: 1, using voltage: DC5V 2: static current: less than 2 ma 3, high level output: 5 v 4, level output: 0 v 5, induction Angle: no more than 15 degrees 6, detection range: 2 cm - 450 cm 7,high precision: up to 0.3 cm

Smart Electronics LNA 50-4000 MHz RF SPF5189 NF 0.6dB Low Noise Amplifier Signal Receiver Board Wireless Communication Module With Shield Shell

LNA 50-4000 MHz RF SPF5189 NF 0.6dB Low Noise Amplifier Signal Receiver Board Wireless Communication Module With Shield Shell Specifications: LNA: 50-4000mhz NF: SPF5189Z LNA0: 0.6 dB Amplifier: FM Size: 34 x 25mm/1.33 x1.0inch

W1209 LED Digital Thermostat Temperature Control Thermometer Thermo Controller Switch Module DC 12V Waterproof NTC Sensor

Temperature range :-50-110 ° Dimensions: 48.5 * 40mm Temperature control mode: ON / OFF Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1° Control accuracy: 0.1 ° Hysteresis accuracy: 0.1° Refresh rate: 0.5S High temperature protection: 0-110° Supply voltage: DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: DC 12V Output power: 20A relay

XH-M542 Mono Digital Power Amplifier Board TPA3116D2 High Power Amplifier 100W

Product parameters: Supply voltage: DC12-26V Output power: 100W Signal to noise ratio: 100db Number of channels: mono Product size: 79*54*16(mm)

DIY Ble 5.0 Audio Receiver Module MP3 Ble Decoder Board Car Audio Speaker 4.1

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

Operating voltage: Dual DC 10 - 45V recommended Dual DC 35V Rated output power :100W(4 Ohm ± 35V) Maximum output power : 150W (4 Ohm ± 45V) enormous heat, is not recommended PCB size :30 x 50 x 35mm Pitch : 5.08mm Hole distance between two power tube : 47mm

Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2

Item: XH-M190 Name: Digital Audio Amplifier Model: XH-M190 The number of chips: dual-core chips Chip Name: TPA3116D2 Input power: DC12V-24V Output power: 100Wx2 Input Impedance: 51Kx2 Power efficiency:> 90% Output resistance: 4-8Ohm Frequency range: 14-100KHz Noise ratio: 100db Output channel: left and right dual channel Size: 105 * 65 * 23MM Net weight: 90g

150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

MAX485 Module RS-485 TTL to RS485 MAX485CSA Converter Module

1 on-board MAX485 chip , is a tool for RS-485 communications , low-power , Slew-Rate Transceiver 2 onboard then 5.08 (mm) pitch 2P terminal for easy wiring RS-485 communication 3 the chip has drawn all of the pins can be controlled by the microcontroller operation 4 Working voltage : 5V 5 board size : 44 (mm) x14 (mm)

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module

SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module

Product Description: ardu 51 STM32 AVR MCU compatible Prototype expand The dual frequency 900/ 1800 MHz, GPRS multi-slot class 10/8,GPRS mobile station class B Power supply range: voltage is 4.6-5.2v; current is 1A or more(the current is very important). Low power consume: 1.5mA (sleep mode) Operating temperature range: -40 degrees C to +85 C Communication interface: The TTL level serial interface compatible 2.85 3.3 5v MCU Size:49*50mm

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

High Power Board Automatic Switching Battery Power XH-M350 Battery Emergency Switch Module 12v150w
Previous： Smart Electronics Aluminum substrate round downlight light board circuit board PCB proofing circuit board
Next： Smart Electronics SIM800L Module with Antenna Replaces SIM900A Short Message Data GSM GPRS 4 Frequency,Available 5V Serial Port
Return
TOP
86-755-83877216
smartbes
smartbes