Search

Smart Electronics ACS712ELC-05B 5A range ACS712 module AC current sensor module

Products > Module > Smart Electronics ACS712ELC-05B 5A range ACS712 module AC current sensor module
    • 1
    • 2
    • 3
    • 4

Smart Electronics ACS712ELC-05B 5A range ACS712 module AC current sensor module

ACS712ELC-05B 5A range ACS712 module AC current sensor module

1. Current sensor chip: ACS712ELC-05B;
2. Pin 5V power supply, onboard power indicator;
3. The module can measure plus or minus 5A current, corresponding to the analog output 185mV/A;
4. When no detection current passes, the output voltage is VCC/2;
5. PCB board size: 31(mm)x13(mm);
shared：


1. Current sensor chip: ACS712ELC-05B; 2. Pin 5V power supply, onboard power indicator; 3. The module can measure plus or minus 5A current, corresponding to the analog output 185mV/A; 4. When no detection current passes, the output voltage is VCC/2; 5. PCB board size: 31(mm)x13(mm); Note: ACS712 is based on the principle of Hall detection, please try to avoid the influence of the magnetic
field when using it!


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics HW-658 USB Port GPS Module For Raspberry Pi

HW-658 USB Port GPS Module For Raspberry Pi Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mould project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need of external memory. Support LOCUS, DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN).

Smart Electronics Level 3 Sensor Module with 25V Maximum Voltage Detector for Arduino

Level 3 Sensor Module with 25V Maximum Voltage Detector for Arduino

Smart Electronics High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2

High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2 Item: XH-M190 Name: Digital Audio Amplifier Model: XH-M190 The number of chips: dual-core chips Chip Name: TPA3116D2 Input power: DC12V-24V Output power: 100Wx2 Input Impedance: 51Kx2 Power efficiency:> 90% Output resistance: 4-8Ohm Frequency range: 14-100KHz Noise ratio: 100db Output channel: left and right dual channel Size: 105 * 65 * 23MM Net weight: 90g

Smart Electronics Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board

Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board This is a power expansion Board especially designed for Raspberry Pi, which enables to use the Raspberry Pi with a moveable power source. It's more convenient to use external 3.7V Lithium battery or 3.7V 18650 Lithium battery;

Smart Electronics 3pin PCB DIY Starter Kit KY-015 DHT11 Digital Temperature Relative Humidity Sensor Module DHT11

3pin PCB DIY Starter Kit KY-015 DHT11 Digital Temperature Relative Humidity Sensor Module DHT11

Smart Electronics HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module

HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module Product model: HC-08 Working frequency band: 2.4G Communication interface: UART3.3VTL level Working voltage: 3.0-3.6V RSSI support: not supported Communication level: 3.3V Transmission power: 4dBm Reference distance: 80 meters Air speed: 2Mbps Antenna interface: built-in PCB antenna Communication current: 0.4uA Receiving sensitivity: 85dbm@2Mbps Working humidity: 10%~90% Storage temperature: 40 ℃ -+80 ℃ Working temperature: -25 ℃ -75 ℃

DIY Ble 5.0 Audio Receiver Module MP3 Ble Decoder Board Car Audio Speaker 4.1

RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V

VCC: + 3.3V TXD : The module's TTL (UART) to send, connected to the microcontroller's RXD receiver pin; RXD : The module's TTL (UART) receiver, connected to the microcontroller TXD send pin; GND : The module ground wire (this wire must be connected with the ground wire of microcontroller system);

Smart Electronics TPA3116D2 high power /HIFI digital 2.1 power amplifier board 10-25V

TPA3116D2 high power /HIFI digital 2.1 power amplifier board 10-25V Product Name: high power digital 2.1 power amplifier board Chip type: tpa3116d2 * 2 Input voltage: dc10-25v (DC) Output power: 50wx2 + 100wxi Max Channel: dual channel + 0.1 subwoofer Output impedance: 4-8 Ω Frequency response 20Hz-20KHz Protection function: short circuit overheat power supply anti reverse connection Switching frequency: 1.2MHz Features: power on delay / anti shock Size: about 88 * 66 * 27.6m Net weight: about 105g

Smart Electronics 0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface Feature Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed

Smart Electronics PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply) Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)

Smart Electronics 150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

Smart Electronics 4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module

4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module 5 V-12V to TTL control signal The control signal DC or AC, 220V AC load can be controlled. There is a normally open and one normally closed contact A power indicator light A control indicator, pull off, disconnect does not shine Transistor drive to increase the relay coil control pins high impedance. The control pin has a pull-down circuit to prevent malfunction relay vacant.

Smart Electronics ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module

ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleepcurrent and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.

Smart Electronics TTP223 touch button module self-locking inching capacitor switch single circuit reconstruction

TTP223 touch button module self-locking inching capacitor switch single circuit reconstruction Size:15mmX11MM Supply:2.5v-5.5v

Smart Electronics New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

Smart Electronics TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

Smart Electronics Cell Pack Module Original 3S 25A Li-ion 18650 BMS PCM Battery Protection Board With Balance For li-ion Lipo Battery

Cell Pack Module Original 3S 25A Li-ion 18650 BMS PCM Battery Protection Board With Balance For li-ion Lipo Battery

Smart Electronics ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

Smart Electronics JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module

JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module Model: JDY-34 Antenna type: PCB board mounted antenna Working frequency band: 2.4G Transmission power: 4dB (peak) Communication interface: UART Working voltage: 2.1V-3.6V Working temperature: -40 ° C-80 ° C Receiving sensitivity: -91dbm Transmission distance: 40 meters Module size: 27 * 12.88 * 1.8mm Bluetooth version: BLE4.2+SSP dual-mode (backward compatible with 4.2, 4.0, 3.0, 2.1, 2.0) Transmission rate: BLE14 K Bytes/s SPP 40K byte/s (Android or computer Bluetooth tested 40K byte/s speed) Command parameter saving: parameter configuration and power-off data are saved SIM welding temperature:<260 ℃ Working current: 15mA
Previous： Smart Electronics W1209 LED Digital Thermostat Temperature Control Thermometer Thermo Controller Switch Module DC 12V Waterproof NTC Sensor
Next： Smart Electronics MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000
Return
TOP
86-755-83877216
smartbes
smartbes