Search

Smart Electronics LORA RFM95 RFM95W 868 915 RFM95-868MHz RFM95-915MHz SX1276 wireless transceiver module

Products > WIFI/GPS/GMS/Wireless RF Module > Smart Electronics LORA RFM95 RFM95W 868 915 RFM95-868MHz RFM95-915MHz SX1276 wireless transceiver module
    • 1
    • 2
    • 3

Smart Electronics LORA RFM95 RFM95W 868 915 RFM95-868MHz RFM95-915MHz SX1276 wireless transceiver module

LORA RFM95 RFM95W 868 915 RFM95-868MHz RFM95-915MHz SX1276 wireless transceiver module

The RFM95 transceiver is a LoRaTM remote communication module, which provides ultra long distance spread
spectrum communication and has super strong anti-interference capability and ultra low current consumption.
shared：

Product introduction:

The RFM95 transceiver is a LoRaTM remote communication module, which provides ultra long distance spread
spectrum communication and has super strong anti-interference capability and ultra low current consumption.
RFM95 uses Huapu RF patented technology LoRaTM module modulation technology, receiving sensitivity of more
than -148dBm, crystal and materials cost low. The combination of high sensitivity and integrated +20dBm power
amplifier reduces the industry's leading link budget, making it an ideal choice for long distance and stable performance
applications. LoRaTM has a strong advantage in the field of traditional modulation technology and in modularization
and sensitivity. It can solve the traditional design problems in the field of remote, anti-jamming and energy consumption.

RFM95 has high performance (G) FSK modulation mode, supporting WMBus, IEEE802.15.4g and other systems.
RFM95 transmits low phase noise, high sensitivity, high quality receiving link and IIP3, and the current power consumption
is significantly lower than that of the same industry.

FAQs:
FAQ 1:
 What`s the difference between RFM95 & RFM95W?
A:
“W” for overseas market. RFM95 = RFM95W, only marking different
FAQ 2:
Why the chip on RFM95W module is RFM96, is it correct?
A:
Yes, it is correct, you can see the module number (RFM95W) on its back.



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V

VCC: + 3.3V TXD : The module's TTL (UART) to send, connected to the microcontroller's RXD receiver pin; RXD : The module's TTL (UART) receiver, connected to the microcontroller TXD send pin; GND : The module ground wire (this wire must be connected with the ground wire of microcontroller system);

Smart Electronics CH341 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver

CH341 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver

Smart Electronics FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz

FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz

Smart Electronics MAX7219 led dot matrix module 4 in 1 display module single chip microcomputer control drive module with 5p wire

MAX7219 led dot matrix module 4 in 1 display module single chip microcomputer control drive module with 5p wire MAX7219 is an integrated serial input/output common-cathode display driver, which connects a microprocessor and an 8-digit 7-segment digital LED display, and can also be connected to a bar graph display or 64 independent LEDs. It includes an on-chip B-type BCD encoder, multiple scan loops, segment word drivers, and an 8*8 static RAM to store each data. Only one external register is used to set the segment current of each LED.

Smart Electronics TPA3255 mono 600W high-power full frequency/subwoofer optional fever digital power amplifier board

TPA3255 mono 600W high-power full frequency/subwoofer optional fever digital power amplifier board TPA3255 is a high-performance class D power amplifier, it has class D efficiency and can bring true high-end sound quality. The device has an advanced integrated feedback design and a proprietary high-speed gate driver error correction function (PurePath™ Ultra HD). This technology allows the device to maintain ultra-low distortion throughout the audio frequency band while exhibiting wonderful sound quality.

Smart Electronics 5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015

5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015 Three in one: (1) Use as an ordinary step-down module with over-current protection capability; (2) Used as a charger for various voltage values of lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery pack), used in solar panels, wind turbines and other occasions; (3) Use as a high-power LED constant current drive module

Smart Electronics TPA3116D2 high power /HIFI digital 2.1 power amplifier board 10-25V

TPA3116D2 high power /HIFI digital 2.1 power amplifier board 10-25V Product Name: high power digital 2.1 power amplifier board Chip type: tpa3116d2 * 2 Input voltage: dc10-25v (DC) Output power: 50wx2 + 100wxi Max Channel: dual channel + 0.1 subwoofer Output impedance: 4-8 Ω Frequency response 20Hz-20KHz Protection function: short circuit overheat power supply anti reverse connection Switching frequency: 1.2MHz Features: power on delay / anti shock Size: about 88 * 66 * 27.6m Net weight: about 105g

Smart Electronics XH-M542 Mono Digital Power Amplifier Board TPA3116D2 High Power Amplifier 100W

XH-M542 Mono Digital Power Amplifier Board TPA3116D2 High Power Amplifier 100W Product parameters: Supply voltage: DC12-26V Output power: 100W Signal to noise ratio: 100db Number of channels: mono Product size: 79*54*16(mm)

Smart Electronics GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

Smart Electronics High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32

High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32

Smart Electronics HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w

HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w Features: 4 USB expansion ports, compatible with USB2.0 / 1.1 transmission USB to UART for Raspberry Pi for serial debugging Multiple indicators for easy access to power, USB to UART and USB expansion interface Operating voltage: 5V Product Size: 65mm × 30mm Fixed hole diameter: 3.0mm Not include Raspberry Pi

Smart Electronics CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

Smart Electronics 0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

Smart Electronics 3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB 320 * 480

3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB320 * 480

Rotating potentiometer knob cap Digital control module Rotary encoder module

Digital control module Rotary encoder module rotating potentiometer knob cap Working voltage: 5 v A circle of pulse count: 20 Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.

Smart Electronics GY-906 MLX90614ESF infrared temperature sensor module

GY-906 MLX90614ESF infrared temperature sensor module Module model: GY-906 Using IC: MLX90614 Power supply: 3-5v (internal low dropout voltage regulation) Communication method: standard IIC communication protocol Size: 11.5*16.5mm

Smart Electronics Esp-32s esp-wroom-32 Wifi Blue-tooth Board Esp32 Development Board esp 32 wroom

Esp-32s esp-wroom-32 Wifi Blue-tooth Board Esp32 Development Board esp 32 wroom Product Optional WROOM-32 WROOM-32U WROOM-32D Neutral WROOM-32 WROOM-32E

Smart Electronics 1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate

1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate 100% brand new and high quality! This section of induction heating using low-voltage DC power supply 12-48V. Maximum current 20A, maximum power 1000W. Can be used for DIY players to heat treatment of small parts such as quenching, annealing, etc. Can directly heat iron, carbon steel, graphite, titanium alloy and other materials. Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.

Smart Electronics 4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module

4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module 5 V-12V to TTL control signal The control signal DC or AC, 220V AC load can be controlled. There is a normally open and one normally closed contact A power indicator light A control indicator, pull off, disconnect does not shine Transistor drive to increase the relay coil control pins high impedance. The control pin has a pull-down circuit to prevent malfunction relay vacant.
Previous： Smart Electronics DC5V-12V Charging module for lithium battery 18650 UPS voltage converter uninterruptible power supply module
Next： Smart Electronics HC-SR04 SR04P ultrasonic sensor Module
Return
TOP
86-755-83877216
smartbes
smartbes