Search

Smart Electronics High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32

Products > Other Module > Smart Electronics High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32
    • 1
    • 2
    • 3
    • 4

Smart Electronics High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32

High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32
shared：

INMP441 omnidirectional microphone module MEMS high-precision 
low-power I2S interface supports ESP32

Product characteristics:

INMP441 is a high-performance, low-power, digital output, omnidirectional MEMS
microphone with bottom port.
1. Digit I with high-precision 24 bit data I² S interface
2. High signal-to-noise ratio of 61 dBA
3. High sensitivity -26 dBFS
4. Stable frequency response from 60 Hz to 15 kHz
5. Low power consumption: Low current consumption 1.4 mA
6. High PSR: -75 dBFS
Interface Definition:SCK: I ² Serial data clock of S interface WS: For I ² Serial Data Word Selection for S Interface L/R: Left/right channel selection. Set to low battery level, microphone at I ² Left channel output signal of frame S. Set to high level, microphone outputs signal on the right channel SD: I ² Serial data output of the S interface. VCC: Input power supply, 1.8V to 3.3V

GND: power ground


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

Smart Electronics 0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

Smart Electronics TTP223 touch button module self-locking inching capacitor switch single circuit reconstruction

TTP223 touch button module self-locking inching capacitor switch single circuit reconstruction Size:15mmX11MM Supply:2.5v-5.5v

Smart Electronics STM32F103C8T6 ARM STM32 Minimum System Development Board Module

STM32F103C8T6 ARM STM32 Minimum System Development Board Module CH32F103C8T6 chip is compatible with STM32F103C8T6 series chips, all pins are compatible, all registers are compatible.

XL 6009 DC to DC Step Up Converter xl6009 step-up power module dc motor

This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out.

Smart Electronics GY-530 VL53L0X Laser Ranging Sensor ToF Ranging Time of Flight Ranging Sensor Module

GY-530 VL53L0X Laser Ranging Sensor ToF Ranging Time of Flight Ranging Sensor Module

Smart Electronics LCD1602 yellow-green screen 1602A lcd display blue

LCD1602 yellow-green screen 1602A lcd display blue 69.5*21.8*17.8 weighs about 30 grams

NRF52832 Low Power Ble 4.2 Module 2.4G Wireless Module BLE4.0 4.2 Module

Smart Electronics GY-291 ADXL345 Digital Three 3 Triple Axis Sensor Acceleration Module IIC SPI Replace ADXL335

GY-291 ADXL345 Digital Three 3 Triple Axis Sensor Acceleration Module IIC SPI Replace ADXL335 1. Adxl345 digital three-axis acceleration of gravity tilt module Ar code iic / spi. 2. Name: the adxl345 module (three-axis acceleration of gravity). 3. use the chip: the adxl345. 4. power supply :3-5v. 5. means of communication: the iic / spi communication protocol. 6. measuring range: ± 2g ± 16g. 7. schematics, manuals and reference documentation of relevant data. 8. 51, the avr, the Ar microcontroller test code. 9. 3-axis, ± 2g / ± 4g / ± 8g / ± 16g.

Smart Electronics 12V Time Delay Relay Module Car Start Delay Switch Time Relay Module

12V Time Delay Relay Module Car Start Delay Switch Time Relay Module

Smart Electronics MLX90640BAA/B 32 * 24 infrared temperature measurement dot matrix sensor module Infrared imaging/IR thermal imager camera module

MLX90640BAA/B 32 * 24 infrared temperature measurement dot matrix sensor module Infrared imaging/IR thermal imager camera module SKU1-MLX90640ESF-BAB-000-TU probe SKU2-MLX90640ESF-BAA probe SKU3-MLX90640ESF-BAA module SKU4-MLX90640ESF-BAB module SKU5-GY-LCD90640-BAB with screen housing SKU6-GY-MODBUS-90640BAB Metal Tube MODBUS Protocol SKU7-GY-IR8062 80 * 60 resolution TTL output MLX90640BAA field of view 110 * 75 degrees (large angle, suitable for close measurement) MLX90640BAB field of view angle 55 * 35 degrees (small angle, suitable for long-distance measurement)

Smart Electronics IRS2092S 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

IRS2092S 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Smart Electronics TTGO T-Display ESP32 WiFi And Ble Module Development Board

TTGO T-Display ESP32 WiFi And Ble Module Development Board Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

L298N motor driver board module intelligent vehicle robot accessory H-bridge drive stepper motor driver

Smart Electronics MAX7219 led dot matrix module 4 in 1 display module single chip microcomputer control drive module with 5p wire

MAX7219 led dot matrix module 4 in 1 display module single chip microcomputer control drive module with 5p wire MAX7219 is an integrated serial input/output common-cathode display driver, which connects a microprocessor and an 8-digit 7-segment digital LED display, and can also be connected to a bar graph display or 64 independent LEDs. It includes an on-chip B-type BCD encoder, multiple scan loops, segment word drivers, and an 8*8 static RAM to store each data. Only one external register is used to set the segment current of each LED.

Smart Electronics 4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module

4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module 5 V-12V to TTL control signal The control signal DC or AC, 220V AC load can be controlled. There is a normally open and one normally closed contact A power indicator light A control indicator, pull off, disconnect does not shine Transistor drive to increase the relay coil control pins high impedance. The control pin has a pull-down circuit to prevent malfunction relay vacant.

DC-DC XL7015 module 5V-80V 0.8A Dc converter Step-down module Wide voltage input better than XL7005A

Smart Electronics TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

Smart Electronics 16 channel relay module 5v power supply control board module 5V12V with optocoupler protection LM2596

16 channel relay module 5v power supply control board module 5V12V with optocoupler protection LM2596
Previous： Other Electric Components Sourcing Electronic Components Accessories PCBA Assemblies Manufacturing Service SMT DIP
Next： Smart Electronics Digispark Kickstarter Micro USB Development Board For ATTINY85 Ardu
Return
TOP
86-755-83877216
smartbes
smartbes