Search

TPA3118 Mono Digital Amplifier Module Board High Sound Quality 60W

Products > Module > TPA3118 Mono Digital Amplifier Module Board High Sound Quality 60W
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8

TPA3118 Mono Digital Amplifier Module Board High Sound Quality 60W

shared：
TPA3118 PBTL Mono Digital Amplifier Board 1X60W
Product Introduction: Power amplifier chip: TPA3118 Power amplifier: 1 * 60W (one channel, requires two stereo speakers) Power supply voltage: 8-24VDC Horn impedance: 4-8 Ω Size: 46 * 35 * 1.6mm Total height of board: 12mm


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

Smart Electronics Raindrop sensor module/rain sensor/large area raindrop module

Raindrop sensor module/rain sensor/large area raindrop module * Distribution bit to adjust sensitivity * A fixed bolt hole for easy installation * Power indicator, the output signal LED indicator * The comparator output, the signal is clean, waveform, driving ability over 15mA * Wide voltage LM393 comparator * A large area of rain board, more conducive to detect rain * Board with positioning holes to facilitate installation * Raindrops and control panels are separate, easy to wire leads

Smart Electronics TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB

TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB Model: TDA7293/TDA7294 Power supply: double AC 15V to 36V (AC needs rectification and filtering) or DC positive and negative 18V to 50V.Recommended double 35V (Note that it is not a dual 35V transformer, it is positive and negative 35V DC. And It is recommended to double 26V/200W toroidal transformer, after rectification voltage is about DC double 35V).

Smart Electronics HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w

HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w Features: 4 USB expansion ports, compatible with USB2.0 / 1.1 transmission USB to UART for Raspberry Pi for serial debugging Multiple indicators for easy access to power, USB to UART and USB expansion interface Operating voltage: 5V Product Size: 65mm × 30mm Fixed hole diameter: 3.0mm Not include Raspberry Pi

Smart Electronics Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board

Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board This is a power expansion Board especially designed for Raspberry Pi, which enables to use the Raspberry Pi with a moveable power source. It's more convenient to use external 3.7V Lithium battery or 3.7V 18650 Lithium battery;

Smart Electronics Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module

Product Description: ardu 51 STM32 AVR MCU compatible Prototype expand The dual frequency 900/ 1800 MHz, GPRS multi-slot class 10/8,GPRS mobile station class B Power supply range: voltage is 4.6-5.2v; current is 1A or more(the current is very important). Low power consume: 1.5mA (sleep mode) Operating temperature range: -40 degrees C to +85 C Communication interface: The TTL level serial interface compatible 2.85 3.3 5v MCU Size:49*50mm

Smart Electronics GY-530 VL53L0X Laser Ranging Sensor ToF Ranging Time of Flight Ranging Sensor Module

GY-530 VL53L0X Laser Ranging Sensor ToF Ranging Time of Flight Ranging Sensor Module

Smart Electronics JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module

JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module Model: JDY-23 Working frequency band: 2.4G Transmission power: 4dB (maximum) Communication interface: UART Working voltage: 1.8-3.6V Working temperature: -40 ℃ -80 ℃ Antenna: Built in PCB antenna Receiving sensitivity: -97dbm Transmission distance: 60 meters Master Slave Support: Slave Module size: 19.6 * 14.94 * 18mm (length, width, height) Bluetooth version: BLE5.0 (also includes BLE4.0 and BLE4.2) Wake up current: 800uA (with broadcast) Shallow sleep current:<50uA (with broadcast) Command parameters: Save parameter configuration, power-off data saved SMT welding temperature:<260 ℃ RF TX/RX peak current: 5mA

Smart Electronics GY-906 MLX90614ESF infrared temperature sensor module

GY-906 MLX90614ESF infrared temperature sensor module Module model: GY-906 Using IC: MLX90614 Power supply: 3-5v (internal low dropout voltage regulation) Communication method: standard IIC communication protocol Size: 11.5*16.5mm

Smart Electronics New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

Smart Electronics Sound Detection Sensor Module Sound Sensor Vehicle

Sound Detection Sensor Module Sound Sensor Vehicle

Smart Electronics XL4016 DC/CC Adjustable 0.2- 9A 300w Step Down Buck Converter 5-40V To 1.2-35V Power Supply Module LED Driver

XL4016 DC/CC Adjustable 0.2- 9A 300w Step Down Buck Converter 5-40V To 1.2-35V Power Supply Module LED Driver Applications: 1. High-power LED driver. 2. Lithium battery(or lead accumulator) charge. 3. Vehicle-mounted power supply. 4. Low voltage system power supply. 5. 6V, 12V, 14V, 24V battery charge. 6. On-board laptop power supply. 7. regulated power supply. 8.Low voltage power supply system.

Smart Electronics Sound sensor module voice control switch strength detection audio amplifier microphone LM386

Sound sensor module voice control switch strength detection audio amplifier microphone LM386 The LM386 is an audio integrated power amplifier with its own low power consumption, adjustable gain for updating the internal chain, wide supply voltage range, fewer external components and less total harmonic distortion. It is mainly used in low-voltage consumer products. In order to minimize the peripheral components, the voltage gain is built-in as 20, and by adding an external resistor and capacitor between pin 1 and pin 8, the voltage gain can be adjusted to any value within 200.

Smart Electronics HC-05 master-slave integrated BlE module DIY wireless serial port transparent electronic module BLE

HC-05 master-slave integrated bluetooth module DIY wireless serial port transparent electronic module BLE

16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 DIY Servo Shield Module

Smart Electronics 3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486

3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486 100% brand new and high quality Features: Vivid TFT Display in 65K Color. Touch Panel Selected. SPI Interface, 4 IOs only. With SD Card Extended (Except 1.44"). Module Display Screen only, other accessories demo in the picture is not included.

DC 30W adjustable booster module LM2587 outperforms the lm2577 in power 5A
Previous： 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 DIY Servo Shield Module
Next： High Power Board Automatic Switching Battery Power XH-M350 Battery Emergency Switch Module 12v150w
Return
TOP
86-755-83877216
smartbes
smartbes