Search

Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor

Products > Sensor > Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor
    • 1
    • 2
    • 3
    • 4

Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor

The IMM0092 of Idong Film Electronics is a member of the single-node sensor family. Although IMM092 has 16 nodes, because IMM00092 has 32 lines of output, each node has 2 lines of output, and the 16 nodes are independent of each other. They are very reliable piezoresistive sensors. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases. Single-point sensors can be measured using a multimeter or customer's own circuit.
shared：

Product Information
The IMM0092 of Idong Film Electronics is a member of the single-node sensor family.
Although IMM092 has 16 nodes, because IMM00092 has 32 lines of output, each node
has 2 lines of output, and the 16 nodes are independent of each other. They are very
reliable piezoresistive sensors. When the pressure (pressure) applied to the effective area
of the sensor increases, the output resistance of the sensor decreases. Single-point sensors
can be measured using a multimeter or customer's own circuit.


Feature
Value
Note
Minimum force
50g
the minimum force value is different for different ranges, this refers to the small force range sensor
Sensor range
1kg
Pressure resolution
analog output, continuous

Pressure repeatability
10%

No excitation resistance
2 Mega Ohms

Sensor thickness
0.18mm

Static resistance
2 Mega ohms
Unstressed, flat, not bent
Sensor rise time
 <5ms

Long-term drift (creep)
1<5% per log(time)

Use times (life cycle)
1 million times

Working temperature
-40℃~60 ℃

Working humidity
5% ~ 95%

Parasitic capacitance
300P
single node
Substrate type
polyester
Thickness  0.075mm
Uniformity
+-25%


Purchase options

1. A2 male terminal 2. Female terminal 3. Female terminal + plastic shell


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics SHTC1 humidity and temperature sensor temperature sensor for agricultural

SHTC1 humidity and temperature sensor temperature sensor for agricultural Datasheet SHTC1 Humidity and Temperature Sensor IC Best performance-to-price ratio Fully calibrated and reflow solderable Ultra-low power consumption Power-up and measurement within 1 ms 1.8 V supply voltage Ultra-small DFN package : 2 x 2 x0 . 75 mm³ Typical accuracy : ± 3% RH and + 0.3 ºC

Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136 The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

Smart Electronics DHT11 module digital temperature and humidity sensor dht-11 electronic building block

DHT11 module digital temperature and humidity sensor dht-11 electronic building block (37 in one) Product parameters: 1. Power supply voltage: 5V 2. Temperature error: 0-50℃ 3. Humidity range: 20-90%RH

Thin Film Pressure Sensor DF9-40 High Precise Force Sensing Resistor Resistance-type Flexible Pressure Sensor

This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. It has pressure sensitive function as well as water-resistant function. When sensor detects outside pressure, the resistance of sensor will change. Pressure signal can be converted into a corresponding electrical signal output using simple circuit.

Smart Electronics DHT22 digital temperature and humidity sensor AM2302 temperature humidity module

DHT22 digital temperature and humidity sensor AM2302 temperature humidity module Technical parameter Measuring range Temperature: -40….+80°℃ Humidity: 0...99.9%RH

Smart Electronics High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

Smart Electronics SS495A SS495A1 hall sensor Magnetic sensors Hall-Effect

SS495A SS495A1 hall sensor Magnetic sensors Hall-Effect

Smart Electronics MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module

MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module Feature 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

Smart Electronics AM2305 Digital temperature and humidity sensor

AM2305 Digital temperature and humidity sensor 1) The relative humidity and temperature, calibration of all digital output 2) Excellent long-term stability 3) Without additional components 4) Long distance signal transmission 5) ultra low power 6) 4 pin installation 7) Completely interchangeable

Smart Electronics 41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

Customized 304 capillary tube/stainless steel seamless pipe, hollow round tube

Smart Electronics NTC Probe for immersion sensor custom steel tube 50mm

NTC Probe for immersion sensor custom steel tube 50mm 1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

Smart Electronics Hall effect sensor ss49e 49e hall element oh49e

Hall effect sensor ss49e 49e hall element oh49e The 49E is a Hall-effect integrated circuit. The output voltage changes with the change of the magnetic flux density, and it can detect the slight change of the magnetic field. It can be used to measure the motion of objects, distance, position sensor, etc. It is alsosuitable for use in harsh environments or heavily polluted conditions.

Smart Electronics Stainless steel temperature sensor probes

Stainless steel temperature sensor probes

Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer

Product category: temperature sensor mounted on board Output type: Digital Configuration: Remote Accuracy: +/- 0.5 C Power supply voltage-minimum: 2.6 V Power supply voltage-maximum: 3.6 V Interface type: 2-Wire Resolution: 10 bit Minimum operating temperature:-40° C Maximum operating temperature: +85 °C Installation style: Through Hole Package / Box: TO-39-4 Package: Tube Temperature threshold: +380 °C Working power supply current: 1.3 mA Unit weight: 2 g

Smart Electronics DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor

DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor

Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube

Smart Electronics MQ2 Mq-2 gas sensor probe

MQ2 Mq-2 gas sensor probe 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.
Previous： Resistive thin film pressure sensor comb type B structure flexible sensor
Next： Smart Electronics A3144E 44E TO-92 Hall Sensor A3144EUA Sensitive Hall-Effect Switches Made in China
Return
TOP
86-755-83877216
smartbes
smartbes