Search

Smart Electronics WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

Products > Sensor > Smart Electronics WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor
    • 1

Smart Electronics WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor
shared：

 

 WSH135 W135  hall element TO92, SOT23 package sensor linearity
1.5 mV/G hall sensor

 

 WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

 

 

WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor
Send Message to us:

 

  • Part Number | Package Type | Quantity are needed if you send mesages to us

  • Send all models you are looking for to us, we can quote all of them.

  • Welcome to attach Purchase / Factory BOM

 

Due to the variety of electronic components we operate, we can't upload
them one by one. If you can't find the model you need in our shop,
please contact us and we will quote the first time.

 

 

WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensorWSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

 

Thank you for all your supports


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics Stainless steel temperature sensor probes

Stainless steel temperature sensor probes

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

Original imported flexiforce film pressure sensor A301 1/25/100lbs

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications. The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb). The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

Smart Electronics MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights

MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights Characteristic: 1,Module size: 32(L)× 20(W)× 22(H) 2,Input voltage: DC5V. 3,Power dissipation: 150mA. 4,DO output: 0.1-5V. 5,AO output: 0.1-0.3V. 6,Detectable concentration: 10-1000ppmCO.

Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136 The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

Smart Electronics Si7021 Temperature and Humidity Sensor Module High Accuracy I2C Interface Industrial SI7021-A20-GM1R Module

Si7021 Temperature and Humidity Sensor Module High Accuracy I2C Interface Industrial SI7021-A20-GM1R Module

Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

Smart Electronics Duct type temperature and humidity sensor housing

Duct type temperature and humidity sensor housing 1. Copper sintered dust cover 2. Stainless steel lock wire seat 3. Good air permeability 4. Widely applicable 5. High cost performance

Smart Electronics DHT11 module digital temperature and humidity sensor dht-11 electronic building block

DHT11 module digital temperature and humidity sensor dht-11 electronic building block (37 in one) Product parameters: 1. Power supply voltage: 5V 2. Temperature error: 0-50℃ 3. Humidity range: 20-90%RH

Smart Electronics U18 / US1881 / OH188/1881, typing U18, hall element, hall sensor, hall switch

U18 / US1881 / OH188/1881, typing U18, hall element, hall sensor, hall switch Applications -Solid state switch -Brushless DC motor commutation -Speed sensing -Position sensing -Angular position sensing -Current sensing

Thermistor Temperature Sensor Shell 5*25mm Nickel-plated Copper Shell PT100 Shell

4*11 4*20 5*20 5*22.5 5*25 6*30 4.2 annular hole M6 stainless steel thread M8 stainless steel thread M6 split nickel-plated copper shell 5*50Stainless steel shell annealed shell groove 6*50Stainless steel shell annealed shell groove

Smart Electronics HAL506 UA-2 TO92-UA Automotive Hall Sensor

HAL506 UA-2 TO92-UA Automotive Hall Sensor Model: HAL506 UA-2 Description: TO92-UA Packaging: CutTape(CT) AlternatePackaging Series: HAL®5xy Part status: LastTimeBuy Technology: Hall Effect Voltage-power supply: 3.8V~24V Current-power supply (maximum): 5.2mA Current-output (maximum): 20mA Output type: OpenDrain Feature: TemperatureCompensated Working temperature: -40°C~140°C (TJ) Installation type: ThroughHole Supplier device package: TO-92UA-2 Package/Shell: TO-226-3TO-92-3ShortBody

Smart Electronics Stainless steel fixed thread temperature sensor Kt100 RTD / E-type thermocouple waterproof temperature measurement wire probe

Stainless steel fixed thread temperature sensor Kt100 RTD / E-type thermocouple waterproof temperature measurement wire probe

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

Smart Electronics NTC Probe for immersion sensor custom steel tube 50mm

NTC Probe for immersion sensor custom steel tube 50mm 1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

Smart Electronics DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor

DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor
Previous： Smart Electronics Hall effect sensor ss49e 49e hall element oh49e
Next： Smart Electronics HAL506 UA-2 TO92-UA Automotive Hall Sensor
Return
TOP
86-755-83877216
smartbes
smartbes